Replacing your Plymouth head gasket is a task that you probably only do once or twice. Even the most enthusiastic DIY mechanic must weigh carefully about undergoing the task, which requires a lot of time, patience and an eye for details. But you can save a lot of money in repair bills by doing the task yourself. The easiest part of the job: ordering your Plymouth head gasket from our site. Once it arrives, the fun begins. You should also come equipped with accurate torque wrenches. If you are going to be working with torque-to-yield head bolts, a torque-to-angle indicator might be necessary. Be aware that when you fasten a Plymouth head gasket back on the block with head bolts, you must consult documentation on the torque levels and the specific sequence when tightening the bolts. That' why it's smart to consult the manufacturer's documentation, as well as your Plymouth repair manual. These manuals will tell you the specifications for the surface flatness and surface finish of your Plymouth head and block. Follow those specs exactly, since any gap between the gasket head and block will break the seal. The Plymouth head gasket will also suffer from friction if a gap is created; that friction can shorten the life of the gasket. The head must the straightened, aligned and then resurfaced to reach the specs. Paying attention to these little details will make a difference in the lifespan of your Plymouth head gasket.