The tie rod end is a significant component in the entire operation of the tie rod of your Nissan vehicle. The tie rod is the performance part that transmits the force from the steering center link or the rack gear to the steering knuckle, thus causing the wheels to turn. The Nissan tie rod end, on the other hand, is that pivoting ball and socket joint that is located near the outer end of the tie rod and is used to connect the tie rod to the center link and to the steering arms. The tie rod end is as significant as the tie rod in your Nissan, and this is the reason why it is imperative that a reliable tie rod end be fitted in your auto. The tie rod end, being a hardworking performance part, may need periodic greasing so that the said part can always perform reliably. It is advisable that all tie rod ends be periodically greased at least twice a year or every 6000 miles, while others are sealed. Bear in mind that a loose or a worn tie rod will cause a feathered wear pattern on the tires and can be considered as one of the leading causes of rapid tire wear. A worn tie rod end can be detected by raising the suspension and rocking the front wheels back and forth. If there is any free play, it probably means that the tie rod ends are bad. The toe alignments must be reset once the new tie rod ends have been installed. There will come a point in time when you may need to get a new tie rod end for your Nissan vehicle. When that time comes, make sure that you secure the Nissan tie rod end. You can find your needed tie rod end and other Nissan auto parts here in our site.