With the gas prices increasing every day, many people are seeking ways to increase the gas mileage of their Dodges. An easy way to get more distance out of a gallon of gas is to install a Dodge throttle body spacer. With about an hour of time and a few simple tools, the installation is easily completed. All of the parts needed to finish the process are inside the Dodge throttle body spacer kit, including a pair of new gaskets. First, the cold air intake must be removed from the throttle body. Then the old gasket between them must be scraped off. The Dodge throttle body spacer will then be installed between the throttle body and the intake, with a gasket on each side. Once the assembly is bolted down, the installation will be complete. With the Dodge throttle body spacer in place, the vehicle will gain up to ten horsepower, plus it will see a mileage increase. The Dodge throttle body spacer does this by enhancing the way the air flows into the engine. Special ridges and other features of the unit create a spiral-shaped flow of air. Thus, the Dodge throttle body spacer makes the air move faster, and more air will be brought in by the intake. It will also make the air more dense, which allows a higher volume of air to reside in the combustion chamber. When fuel is added, more power is produced. In our online catalog, we carry the proper Dodge throttle body spacer for most models, and it can be ordered through our secure web site, or with a quick call to our toll-free phone lines.