The Daewoo valve cover gasket is a vehicle component that seals the connection points between the valve cover and the valve train. It is the metal covering positioned at the top of the cylinder head which secures the valve train in place. The valve cover gasket provides a closure in order to prevent leakage of oil and coolant from surfacing in the cylinder head and the engine. Also, air and dirt are restricted from entering the valve train so as to maintain its efficiency and consistency. Your Daewoo valve cover gasket may seem a simple device to you but its contribution to your Daewoo vehicle could never be ignored. So to protect your vehicle from constant leaking, it is on your best advantage to be equipped with highly efficient valve cover gaskets. Aside from the valve cover gasket, there are also other gaskets present in your vehicle. This include the cylinder head gasket, exhaust gasket, oil drain plug gasket, and the intake manifold gasket. All these gaskets are designed to deliver a leak-free seal between the mating surfaces, internal passages and even outside the engine. Your valve cover gasket sees to it that the valve cover is firmly attached but not too tight in the valve train surface in order to ensure that the lubrication oil is retained. The primary function of the valve cover gasket is to put a halt in oil leaks on your vehicle however; the valve cover gasket is usually over tightened leaving it to be squeezed. Excessive compression can actually lead to the gasket to be futile and leaks will be prevalent. The best way to ensure that the valve cover gasket will fully perform its task is to follow preventive measures such as regular oil and oil filter change, engine performance checkups, and cooling system inspection. The Daewoo valve cover gasket is crafted to be made to have excellent resistance to oil and coolant. You can find this product by browsing our catalog.