|
|
Home > Car Bra
 |
|
|
 |
|
 |
|
Car Bra Description |
|
|
It's impossible to talk about the car bra without making a joke about how well car bra supports your front end. So there, it's out of the way and we can get down to business. A car bra, also called a front-end mask, is a piece of vinyl that wraps around the exposed front portion of your vehicle. Not surprisingly, a custom car bra protects against flying rocks, debris, and myriad other odds and ends that might smack the front of your car, causing dents and scratches. A car bra is also a styling accessory, though, creating a sleek, custom look at the front of your ride. The auto car bra has come a long way in recent years, and now provides much better protection while allowing your paint to breathe too. And speaking of protection, there's no better way than installing a car bra to keep your front end ding-free. With a heavy vinyl outer layer and padding beneath, a car bra can stop a hit from a fairly large chunk of junk without telegraphing the impact to the paint below. And, unlike some other front-end protective devices, a car bra is easy to remove and reinstall at a moment's notice. As with all our auto accessories, you can find a car bra custom-fitted for your ride at the lowest wholesale prices right here. To ensure that you only get the best car bra, we only carry the top name brands in the country. That means the fit will be tight, the protection will be thorough, and, when you buy your car bra here, the price will be rock-bottom.
|
|
 |
 |
|
 |
 |
|
 |
|
| Car Bra - Top Sellers
|
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK -- A 2-piece front end mask; Made of heavy-gauge leather grain vinyl with soft padded protective backing; Features protective air intake screens that are sewn into the outside of the mask to avoid loose pieces of material inside which can abrade the paint surface, covered aluminum adjustment tabs to allow adjustment at the fender wells as vinyl expands and contracts due to temperature, and reinforced air foils to prevent flapping and lift; Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe; Provides protection from nicks, stones, and scratches; Custom tailored to exactly fit your vehicle and easily allow hood to open with mask in place; Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability; Easy no-drill installation; This custom front end mask is made to order specifically for your vehicle; Please note that this product will be shipped out from our facility 10-14 business days after the order has been confirmed.
Material:
Vinyl
COVERCRAFT MN SERIES MINI MASK HOOD PROTECTOR, VINYL, BLACK -- Made of heavy-gauge leather grain vinyl with soft, protective backing; Features micro-perforated finish that allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather; Has protective air intake screens that are sewn into the outside of the mask to avoid loosing pieces of material inside which can abrade the paint surface; Its reinforced air foils prevent the mask from flapping and lifting; A white non-woven fleece is also used in this protector for easier back-side cleaning; Has seams that are overlapped and finished with a strong, durable top stitch and edges that are covered with soft, non-abrasive felt-rimmed bindings; Protects the area of the hood that takes the most abuse; Allows hood opening and easy engine access; An economical alternative to full front mask; Can be stored easily in the trunk or under the seat; Easy installation with no tools or hardware required; This custom hood protector is made to order specifically for your vehicle; Please note that this product will be shipped out from our facility 10-14 business days after the order has been confirmed.
COVERCRAFT MN SERIES MINI MASK HOOD PROTECTOR, VINYL, BLACK -- Made of heavy-gauge leather grain vinyl with soft, protective backing; Features micro-perforated finish that allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather; Has protective air intake screens that are sewn into the outside of the mask to avoid loosing pieces of material inside which can abrade the paint surface; Its reinforced air foils prevent the mask from flapping and lifting; A white non-woven fleece is also used in this protector for easier back-side cleaning; Has seams that are overlapped and finished with a strong, durable top stitch and edges that are covered with soft, non-abrasive felt-rimmed bindings; Protects the area of the hood that takes the most abuse; Allows hood opening and easy engine access; An economical alternative to full front mask; Can be stored easily in the trunk or under the seat; Easy installation with no tools or hardware required; This custom hood protector is made to order specifically for your vehicle; Please note that this product will be shipped out from our facility 10-14 business days after the order has been confirmed.
COVERCRAFT MN SERIES MINI MASK HOOD PROTECTOR, VINYL, BLACK -- Made of heavy-gauge leather grain vinyl with soft, protective backing; Features micro-perforated finish that allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather; Has protective air intake screens that are sewn into the outside of the mask to avoid loosing pieces of material inside which can abrade the paint surface; Its reinforced air foils prevent the mask from flapping and lifting; A white non-woven fleece is also used in this protector for easier back-side cleaning; Has seams that are overlapped and finished with a strong, durable top stitch and edges that are covered with soft, non-abrasive felt-rimmed bindings; Protects the area of the hood that takes the most abuse; Allows hood opening and easy engine access; An economical alternative to full front mask; Can be stored easily in the trunk or under the seat; Easy installation with no tools or hardware required; This custom hood protector is made to order specifically for your vehicle; Please note that this product will be shipped out from our facility 10-14 business days after the order has been confirmed. Fits: 4-Door, Sedan.
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK -- A 2-piece front end mask; Made of heavy-gauge leather grain vinyl with soft padded protective backing; Features protective air intake screens that are sewn into the outside of the mask to avoid loose pieces of material inside which can abrade the paint surface, covered aluminum adjustment tabs to allow adjustment at the fender wells as vinyl expands and contracts due to temperature, and reinforced air foils to prevent flapping and lift; Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe; Provides protection from nicks, stones, and scratches; Custom tailored to exactly fit your vehicle and easily allow hood to open with mask in place; Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability; Easy no-drill installation; This custom front end mask is made to order specifically for your vehicle; Please note that this product will be shipped out from our facility 10-14 business days after the order has been confirmed.
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK -- A 2-piece front end mask; Made of heavy-gauge leather grain vinyl with soft padded protective backing; Features protective air intake screens that are sewn into the outside of the mask to avoid loose pieces of material inside which can abrade the paint surface, covered aluminum adjustment tabs to allow adjustment at the fender wells as vinyl expands and contracts due to temperature, and reinforced air foils to prevent flapping and lift; Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe; Provides protection from nicks, stones, and scratches; Custom tailored to exactly fit your vehicle and easily allow hood to open with mask in place; Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability; Easy no-drill installation; This custom front end mask is made to order specifically for your vehicle; Please note that this product will be shipped out from our facility 10-14 business days after the order has been confirmed.
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK -- A 2-piece front end mask; Made of heavy-gauge leather grain vinyl with soft padded protective backing; Features protective air intake screens that are sewn into the outside of the mask to avoid loose pieces of material inside which can abrade the paint surface, covered aluminum adjustment tabs to allow adjustment at the fender wells as vinyl expands and contracts due to temperature, and reinforced air foils to prevent flapping and lift; Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe; Provides protection from nicks, stones, and scratches; Custom tailored to exactly fit your vehicle and easily allow hood to open with mask in place; Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability; Easy no-drill installation; This custom front end mask is made to order specifically for your vehicle; Please note that this product will be shipped out from our facility 10-14 business days after the order has been confirmed.
Material:
Vinyl
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK -- A 2-piece front end mask; Made of heavy-gauge leather grain vinyl with soft padded protective backing; Features protective air intake screens that are sewn into the outside of the mask to avoid loose pieces of material inside which can abrade the paint surface, covered aluminum adjustment tabs to allow adjustment at the fender wells as vinyl expands and contracts due to temperature, and reinforced air foils to prevent flapping and lift; Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe; Provides protection from nicks, stones, and scratches; Custom tailored to exactly fit your vehicle and easily allow hood to open with mask in place; Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability; Easy no-drill installation; This custom front end mask is made to order specifically for your vehicle; Please note that this product will be shipped out from our facility 10-14 business days after the order has been confirmed.
Material:
Vinyl
|
|
 |
 |
|
 |
|
|
Car Bra - Auto Car Bra - Custom Car Bra - In Stock - Guaranteed Low Prices
|
|