Preventing oil leaks can be very frustrating sometimes especially if you are having a hard time finding the source of the problem. One of the most common sources of oil leaks is a bad valve cover gasket. But before you begin your repair, you have to determine first what kind of leaks your vehicle has. Actually, there are two types of oil leaks, a seep and a leak. The seep is a slow seepage of oil that does not create a drip. This kind of leak is hardly noticeable on the pavement as a 'spill' and usually does not seep enough oil to unfavorably affect the level of oil between the oil changes. The leak on the other hand causes oil drip every time the vehicle is parked. It creates a puddle of oil on the pavement and continuously drips while the vehicle is running. This is usually accompanied with burning odor. If there are leaks, you should correct it immediately. As one of the common sources of leaks, the valve gasket cover should be regularly checked. It is significant to the vehicle since it is the chief responsible for sealing the oil inside the valve cover in order to prevent leaks as the engine runs. Valve cover gaskets are created from silicone, cork, or rubber. Various types of engines may acquire up to four valve cover gaskets. Replacing a faulty valve cover gasket is easy, but before you do that, you have to find first a top quality valve cover gasket that will provide you an optimum performance. For best results, you need to find an Acura valve cover gasket for your Acura. An Acura valve cover gasket will surly fit the specifications of your Acura vehicle. And this is the place where you can find the complete selections of automotive parts and accessories including the Acura valve cover gasket.